Program via
face-to-face copy the unique
Came Top432na remotes, please refer to user
guide.
For
a standard
TOP432NA Remote Handle,
the programming procedure
is as follows. Ensure
that to
put in the battery during
the transmitter appropriately.
1.
Press and hold the best
two round buttons simultaneously
for somewhere
around 10
seconds till
the LED indicator starts
to flash, indicating the
pre-installed remote control
codes have
been deleted.
2. Place
the original
CAME remote control
and copy remote near
each other. Press and hold one
button in
your unique
CAME remote as
well as the button on copy remote which you want
to be programmed on at
the same time, right
up until the LED indicator begins
to flash quickly,
indicating that
the button has
become successfully
copied.
3. Press the transmitter button to check
operation.
The above
techniques
is ways
to duplicate / programme using
our SR-C1 compatible remote control,
for other cloning remotes, please refer to respective manufacturer's manual.
No comments:
Post a Comment